Special Safety Rules; Specifications; Operation - Ryobi CST-180M Owner's Operating Manual

hands of untrained users.
e. Maintain power tools. Check for misalignment
or binding of moving parts, breakage of parts
and any other condition that may affect the
power tools operation. If damaged, have the
power tool repaired before use. Many accidents
are caused by poorly maintained power tools.
f. Keep cutting tools sharp and clean. Properly
maintained cutting tools with sharp cutting edges
are less likely to bind and are easier to control.
g. Use the power tool, accessories and tool bits
etc., in accordance with these instructions and
in the manner intended for the particular type
of power tool, taking into account the working
conditions and the work to be performed. Use
of the power tool for operations different from
intended could result in a hazardous situation.
5. BATTERY TOOL USE AND CARE
a. Recharge only with the charger specified by
the manufacturer. A charger that is suitable for
one type of battery pack may create a risk of fi re
when used with another battery pack.
b. Use power tools only with specifically desig-
nated battery packs. Use of any other battery
packs may create a risk of injury and fi re.
c. When battery pack is not in use, keep it away
from other metal objects, like paper clips,
coins, keys, nails, screws or other small metal
objects, that can make a connection from one
terminal to another. Shorting the battery termi-
nals together may cause burns or a fi re.
d. Under abusive conditions, liquid may be
ejected from the battery; avoid contact. If con-
tact accidentally occurs, flush with water. If
liquid contacts eyes, additionally seek medical
help. Liquid ejected from the battery may cause
irritation or burns.
6. SERVICE
a. Have your power tool serviced by a qualified
repair person using only identical replacement
parts. This will ensure that the safety of the power
tool is maintained.

SPECIAL SAFETY RULES

Always wear safety glasses with side shields.
■
Everyday glasses have only impact resistant lenses.
They are NOT safety glasses. Following this rule will
reduce the risk of eye injury.
Protect your lungs. Wear a face or dust mask
■
if the operation is dusty. Following this rule will
reduce the risk of serious personal injury.
English
Protect your hearing. Wear hearing protection
■
during extended periods of operation. Following
this rule will reduce the risk of serious personal injury.

SPECIFICATIONS

Voltage
Switch
Magazine Capacity
Staple Speed
Staple Size
- Crown Width
- Length
MODEL
CST-180M

OPERATION

WARNING
Do not allow familiarity with products to make
you careless. Remember that a careless fraction
of a second is sufficient to inflict serious injury.
WARNING
Always wear safety goggles or safety glasses
with side shields when operating products.
Failure to do so could result in objects being
thrown into your eyes, resulting in possible
serious injury.
WARNING
Do not use any attachments or accessories
not recommended by the manufacturer of this
product. The use of attachments or accessories
not recommended can result in serious personal
injury.
2
18 V
Single shot trigger
84 staples
40 shots min
Type 50
10.8mm
6.3mm, 7.9mm, 9.5mm,
12.7mm, 13.5mm, 14mm
COMPATIBLE
COMPATIBLE
BATTERY
CHARGER
PACK
BCL-1800
BPL-1820
BCS618
BPL-1815
BCL1418
BCL-1800
ABP1801
BCS618
ABP1802
BCL1418
ABP-1813
ACR1800
ABP-1815
260022029
-1