Description; Specifications; Proper Use Of Machine - Ryobi ETS-1525 User Manual

ETS-1525 manual 9/09/03
GB
F D E
ADDITIONAL SAFETY PRECAUTIONS FOR
TABLE SAW
- wear gloves when handling saw blades and rough
material. Saw blades shall be carried in a holder
whenever practicable.
Dust developing during operation can be harmful to
your health, inflammable or explosive. Never cut
metals or materials which may make hazardous dust.
Do not use High speed steel (HS) blades.
Use the push stick when required. Always use a push
stick for ripping narrow stock. Refer to ripping
applications in this Instruction Manual where use of
the push stick is covered in detail. The push stick
should always be stored with the machine when
not in use.
Always use the saw blade guard and riving knife for
every operation, including through sawing. Through
sawing operations are those in which the blade cuts
completely through the work piece when ripping or
crosscutting. Always hold the work firmly against the
mitre gauge or fence.
Never perform any operation "free hand". Always use
either the fence or the mitre gauge to position and
guide the work.
Rebating or grooving should not be carried out.
Saws shall not be used for slotting (stopped groove).
Use only saw blades for which the maximum possible
speed is not less than the maximum spindle speed of
the tool and the material to be cut.
Never stand or have any parts of your body in line
with the path of the saw blade. Keep your hands out
of the line of the saw blade.
Move the rip fence out of the way when cross cutting.
Feed the work into the blade or cutter AGAINST the
direction of rotation only.
Never use the fence as a cut-off gauge when
crosscutting.
Never attempt to free a stalled blade without first
turning the saw OFF. Turn off the power switch
immediately to prevent motor damage.
When transporting the machine use only
transportation devices and do never use guards for
handling or transportation.
During transportation the upper part of the saw blade
should be covered; for example by the guard.
Use an extension table for supporting long
workpieces during cutting operation.
17:40 Page 8
I P NL S DK
English

DESCRIPTION

1.
2.
4.
5.
6.
7.
8.
9.
10. Mitre Gauge Lock
11. Tilting Handle
12. Bevel Indicator
13. Elevating Handle
14. Reset Button
15. Saw Blade
16. Push Stick
17. Table Insert
18. Front Rail
19. Sliding Block
20. Riving Knife
21. Stand (Optional)
22. Dust Port

SPECIFICATIONS

Input voltage
Watts
Blade diameter
Bore size
No load speed
Depth of cut at 90°
Depth of cut at 45°
Main table size
Extension table size
Sound pressure level
Net weight

PROPER USE OF MACHINE

This machine is designed to rip and cross cut wood
exclusively up to maximum thickness of 80 mm.
For correct operation it must be fixed and operated as
explained in this manual.
8
N FIN GR H CZ
Body
ON/OFF Switch
Rip Fence Lock Knob
Extension Table
Rip Fence
Blade Guard
Table Top
Mitre Gauge
110V / 230 V ~ 50 Hz
1500 W
254 mm
30 mm
4500 min
80 mm
50 mm
638 x 430 mm
638 x 260 mm
99 dB(A)
35.5 kg
WARNING
Noise can be a health hazard. When the noise
level exceeds 85 dB(A) be sure to wear
ear protection.
RUS RO PL
-1