Gateway 450ROG User Manual page 121

To insert a CD or DVD:
1
Press the eject button on the disc drive. After the disc tray opens slightly,
pull the tray completely open.
Important
2
Place the disc in the tray with the label facing up, then press down carefully
on the disc until it snaps into place.
Important
3
Push the tray in until it is closed.
If the disc drive is not in the modular bay, you need to swap
modules. For more information about swapping modules,
see "Changing modules" on page
When you place a single-sided disc in the tray, make sure
that the label side is facing up. If the disc has two playable
sides, place the disc so the name of the side you want to
play is facing up.
www.gateway.com
Using the disc drive
104.
111