Advertisement
No display appears
Is the power switched
on at the socket?
Is the power cord
plugged in?
No dial tone on
telephone
Is the telephone line
cord plugged into the
back of the Response
85 unit?
Is the Response 85
line cord plugged into
the wall socket?
Flashing E
Indicates error.
Press the
ANSWER
button on
ON/OFF
your answering
machine. Flashing
should stop and
Response 85 should
26
Help
If you have a problem, the following
simple solutions may provide the
answer
reset to settings on
first 'power up'.
Response 85's battery
low indicator is on
Battery
1
0
Low
The back-up battery is
either low in power,
missing or incorrectly
installed. Lift your
answering machine
speaker cover and
open the battery
compartment. If
battery is correctly in
place, try replacing it
with a new 9V alkaline
battery. When
operating at normal
power the battery
light remains off.
Incoming message
does not record
Make sure your
Response 85 is set to
answer-on mode and
that the memory is not
full. When the
memory is full, the
display will flash F .
You cannot hear
messages or incoming
calls
Your Response 85's
volume may be set too
low. Adjust the volume
by pressing
+
on the
volume control.
You experience a
power cut
If a working battery is
installed inside your
Response 85, its
settings and messages
should be saved until
power resumes.
However, it will not be
able to record any
new messages.
Advertisement
