Advertisement
Press and hold the
1
OGM SELECT
Release the button
2
when you hear the
name of the message
you wish to change.
Then, to record your
new message...
Press and hold the
1
OGM CHECK/RECORD
button.
Your Response 85 will
beep to tell you when
it is starting recording.
Keep holding the
2
CHECK/RECORD
button and record
your message into the
microphone.
3
When you have
finished, release the
button.
Your Response 85 will
beep, play back your
message, then beep to
confirm the recording.
The new message will
be set to play to
incoming callers.
12
To re-record your
button.
outgoing message, repeat
this procedure.
To reinstate the
You can delete your
outgoing message
and return to your
Response 85's pre-
recorded outgoing
message.
Firstly, make sure you
1
have selected the
correct outgoing
message.
Press the
OGM
2
CHECK/RECORD
button.
Your outgoing
message will be
played back to you
While the message is
3
playing, press the
DELETE
pre-set OGM
OGM
(Your message)
button.
Delete/Time
Your Response 85 will
beep and play its pre-
recorded outgoing
message. This message
will be set to play to
incoming callers.
Hello, your call cannot
be taken at the moment, so please
leave your message after the tone.
Your own message has
now been replaced by
the Response 85's
original pre-recorded
message.
To switch your
Response 85 on and
off
Press the
ANSWER
button. Your
ON/OFF
Response 85 will
announce...
Answer off
Stop
Answer
on/off
The display shows a
single dash.
Advertisement
