Advertisement
When you have finished
deleting and your
Response 85 has finished
playing all messages, you
will hear 'End of
messages'. If you press
the
ANSWER ON/OFF
button within 8 seconds of
hearing this message you
can cancel all deletions
and retain your messages.
To delete all
messages
Following play back of
messages, your
Response 85 will count
down from 8 to 0.
During this time you
can delete all stored
messages.
Press the
1
DELETE
button while the
display is counting
down from 8 to 0.
Delete/Time
16
Your Response 85 will
announce...
All messages
deleted
It will then continue
its count down to 0,
and return to the set
answer mode.
If you accidentally delete
all messages, you can still
save them by pressing the
ANSWER ON/OFF
before count down reaches 0.
To set the answer
delay
Answer delay sets the
number of times your
Response 85 will ring
before answering a
call.
Press and hold the
1
button.
SKIP
Skip
Your Response 85 will
announce the current
setting and it is shown
on the display.
2
Keep holding the
SKIP
Response 85 will
announce the answer
delay options...
button
Your Response 85 is pre-
set to Time Saver. This
means that during remote
access (see page 20), if
any messages have been
recorded, your Response
85 will answer after only
2 rings. If there are no
messages, it will answer
after 6 rings, thereby
allowing you the option of
hanging up before your
Response 85 answers. By
using Time Saver you can
avoid the cost of a call.
2 rings
button. Your
Time Saver, 2, 3,
4, 5, 6, 7, 8, 9
Time Saver
Advertisement
