Advertisement
Using additional handsets
and bases
Up to six handsets can be registered and
operated from any one base. This allows you
to make internal calls between two handsets
while a third is making an external call.
Each handset can also be registered on up to
four bases.
Each additional handset you purchase must
be registered to a base.
Your handset supplied is pre-registered
(as Handset 1) to its base (as Base 1).
The following base stations and handsets are
in the BT On-Air range:
BT On-Air 1100 Classic
BT On-Air 1100 Executive
BT On-Air 1200 Classic
BT On-Air 1300 Executive
BT On-Air 1000 Classic handset and charger
BT On-Air 1000 Executive handset and charger
BT On-Air DECT f@x plus
11
If you purchase new handsets to use with
your current BT On-Air 1100, they will not be
pre-registered to a base station. You will need
to do this before you can use them.
At the base:-
Press and hold down the button on
the base until it starts to flash.
On the handset:-
Press the
Press the
button
The handset will now automatically
register with the handset number.
At the base:-
Press and hold down the button on
the base until it starts to flash.
On the handset:-
Press the
Press the
button
Use the
or
select the base number ie.
Press the
Enter the System Code.
Wait until the available handset
numbers appear. ie.
the handset number that you want.
button.
button.
button to
button.
Then press
Advertisement
