Incoming calls will not cause the handset to ring. Redial Intercom Recall For use with Switchboards and Displayed during an external call BT Select Services. Enables internal calls Lets you move through and call transfer the options and lists. between handsets.
Date of purchase: place of purchase immediately. Place of purchase: One BT On-Air 1100 base. One BT On-Air 1000 Classic handset. Serial number One power supply for base station. For warranty purposes proof of purchase is One telephone line cord.
Setting up Please note that your handset is already Once connected, put the plinth back on the registered to the base station. base to prevent it from rocking on the table. There are two positions for the plinth when joining it to the base, both can be used for desk mounting and one for wall mounting.
Page 6
New batteries can be obtained are first installed. The batteries must first be from any BT Shop or from the helpline on fully charged. 0845 601 2476 Slide off the battery cover and install the battery.
Using the telephone Press the button to Press and hold the answer the call. button to switch the handset on. Press and hold the button to switch the handset off. You can adjust the volume during a call. Press the button to increase the volume.
Page 8
You can store up to 20 of your most frequently used numbers. Press the button. This will take you to the most recent number. Press the button the Use the button to display shows MEM... scroll to the number you require. Use the button to scroll to Press the...
Page 9
If you have multiple handsets registered to a base you can make internal calls between handsets. To use Caller Display you must first subscribe to BT’s Caller Display Service. Your BT On-Air product will only work on BT’s Caller Display Service. Intercom Press the button.
Page 10
When you receive a call the caller’s number will appear on the display. If the caller has withheld their number then ------------- will appear on the display. You can set your handset to beep or play a If for some reason the caller’s number is not available then will appear on tone when you press a button on the keypad.
Page 11
Intercom Press the button. Your base station has a default setting of 0000 but you may want to change this to prevent Press the button. unauthorised use of the handset. Press the buttons. If you change your System Code keep record Use the keypad to input the date of the new number by writing it in the space provided on page 3.
Using additional handsets and bases If you purchase new handsets to use with your current BT On-Air 1100, they will not be Up to six handsets can be registered and pre-registered to a base station. You will need operated from any one base. This allows you to do this before you can use them.
Page 13
Enter the System Code. All registered handset numbers are displayed. If you are experiencing difficulty, please call the BT On-Air Helpline on Enter the number of the handset to be de-registered. INIT = ok6 will appear on the de- registered handset.
The BT On-Air 1100 Classic (with up to 6 handsets) has a total REN of 1. Any other instrument provided by BT may be assumed If your product needs repair after the to have a REN of 1 unless stated otherwise.
Page 15
Generally this telephone may be connected to switchboards which support tone signalling Intercom Press the button. and timed break recall. In the event of any difficulties please consult your switchboard Press the button. F1 will appear service provider. on the screen. Press .
Wall mounting SCREW WALL PLUG WALL If wall mounting your BT On-Air 1100 Classic, use this guide for position. • Make sure that you are not drilling into any hidden wiring and check that the power 122 mm cable will reach from the mains socket to the charger.
Index dditional handsets aging ase settings Power supply Base station priority egistering Returning your product Battery charge Ringer install melody low warning volume aller display afety information Call timer Secrecy Calls Setting up Silent ring internal Switchboard use make System code receive echnical information redial...
Page 18
Registered in England No. 1800000. CE compliant to 89/336/EEC Designed by: The Art & Design Partnership Limited. Printed in Europe. On-Air 1100 Classic. Issue 1 (7/00) 4 (EMC Directive) & 73/23/EEC (Low Voltage Directive) Printed on paper which meets international environmental standards.