Setting Up - BT FREEHAND User Manual

Setting up

Freehand ready for use.
Check that your Freehand is
complete. When you unpack, you
should have:
Freehand telephone unit.
•
Telephone line cord.
•
Mains power supply unit.
•
Wall-mounting bracket.
•
Electrical storm warning
During periods of electrical storm,
1
you are advised to disconnect your
apparatus because damage may
occur.
If a fault occurs during the 12-month
2
warranty period and it is due to
accidental or wilful damage
(including lightning and electrical
damage), BT will not replace or
repair free of charge.
Important
A certain amount of heat will be
produced in your phone's day-to-day
operation. While this is entirely safe, we
advise against placing this product on
antique, veneered or delicate wooden
surfaces as damage may occur.
Follow these steps to get your
1 Setting the recall mode
Your Freehand has been designed
for use on modern exchanges. Set
the recall mode using the switch on
the underside of your Freehand.
If you are not using your Freehand
•
through a switchboard, set the
recall mode to
If you are using your Freehand
•
through a switchboard, set the
recall mode to
Break Recall or
Loop Recall.
T-TB/T-E
Note
Your Freehand uses Tone dialling only.
.
T-TB
for Time
T-TB
for Earth
T-E
5