Using Caller Display And - BT DIVERSE 3000 CLASSIC User Manual

Using Caller Display and

Call Waiting
If you subscribe to Caller Display
you can see who is calling you
(on your handset display). If you
are on a call and you also
subscribe to a Call Waiting service,
the second incoming call number
will appear on the handset display
and you will hear an intermittent
beep through the handset. This is
to alert you to another caller
waiting to speak to you.
With BT's Caller Display and Call
Waiting service your Diverse
base station receives caller
information which is transmitted
over the BT Network.
If you are using the Classic
handset, the screen shows the
caller's number (if it has been
sent) when the phone rings.
With the Executive handset if you
have stored a name to go with the
number in your handset
directory, the name will be
displayed instead.
26
Press the
R
button. Your first caller
is put on hold whilst
you speak to your
second caller.
To speak to your first
caller again you can
either:
Press the
R
button again and you
will be reconnected to
your first caller, your
second caller will be put
on hold. You can use the
R
button to toggle
between the two callers.
Or
Press the
button to end the
conversation with the
caller you are currently
speaking to. The
handset will ring again.
Press the
button and you
will be reconnected to
the caller who was
on hold.