Using Your Carpet Glider - Shark LIFT-AWAY PRO POCKET S3901 N Owner's Manual

fig. 12
5 When one side of the cleaning pad gets dirty,
just flip the mop and you can quickly start using
the other side. (fig. 12)

Using Your Carpet Glider

THE CARPET GLIDER
1 The Carpet Glider can be used with the All-
Purpose Head to lightly steam your carpet
and area rugs. Just place the mop head with
the cleaning pad attached into the glider. The
recommended steam setting is SCRUB when
using the Carpet Glider. (fig. 13)
S3901_N_11_IB_E_120410_6.indd 9
6
fig. 13
2
When the water tank is empty, the Steam
Mop will stop producing steam. You can refill
the water tank at any time as long as the
mop is unplugged from the outlet. Follow
the instructions from page 5. This applies to
switching the mop heads or the cleaning pad as
well.
NOTE: Please wait 2-3 minutes for the Steam
Mop to cool off before switching the mop head
or the cleaning pad. Never leave the Steam Mop
with a damp/wet cleaning pad on any floor.
The Steam Mop will not clean your carpeting or
area rugs. However, it is great for grooming and
freshening.
Move the Steam Mop back and forth across a
section of the carpet. (fig. 14)
www.sharkclean.com
fig. 14
9
12-04-10 11:33 AM