Using Your Carpet Glider - Shark S2901SL Owner's Manual

fig. 7

Using Your Carpet Glider

THE CARPET GLIDER
1
The Carpet Glider can be used with the
Rectangular Head to lightly steam your carpet and
area rugs. Just place the mop head with cleaning
pocket attached into the glider. (fig. 8)
6
7
8
fig. 8
2
Use the shaggy side of the cleaning pockets to lift
up and lock away all the dirt and debris and the
scrubbing side to break up the tough stains.
(fig. 7)
When the water tank is empty, the Steam Mop will
stop producing steam. You can refill the water tank
at any time as long as the mop is unplugged from
the outlet. Follow the instructions from page 4.
This applies to switching the mop head or cleaning
pocket as well.
NOTE: Please wait 2-3 minutes for the Steam
Mop to cool off before switching the mop head or
the cleaning pocket. Never leave the Steam Mop
with a damp/wet cleaning pocket on any floor.
When you are done, press the power button to turn
the steam mop off.
The Steam Mop will not clean your carpeting or
area rugs. However, it is great for grooming and
freshening.
Move the Steam Mop back and forth across a
section of the carpet. (fig. 9)
fig. 9
5