Shark LIFT-AWAY PRO POCKET S3901 N Owner's Manual page 11

3 Press the ON/STEAM SETTING button once for
DUST setting (DUST lighted setting indicator will
flash and turn solid blue when it is ready to use).
DUST setting is a light steam for a quick dusting
and best dry time. (fig. 9)
Press the ON/STEAM SETTING button twice for
MOP. MOP setting is for normal, everyday steam
cleaning. (fig. 10)
Press the ON/STEAM SETTING button three
times for SCRUB. SCRUB setting is for heavy
cleaning and will leave floors damp.
After you have selected your desired steam
setting, the setting indicator light will flash and
turn solid blue when it is ready to use.
S3901_N_11_IB_E_120410_6.indd 7
fig. 9
fig. 10
To better understand which steam setting to use
for your cleaning task, see page 8.
4 Clean your floors with a forward and backward
motion. (fig. 11)
When you are done, press the ON/STEAM
SETTING button until the light blinks blue as in
standby mode.
NOTE: When using your Shark
Pro Steam Pocket
®
careful not to press the steam trigger on the
Handheld Steamer, as it will activate STEAM
SETTING mode. If this happens, press the ON/
STEAM SETTING button one time to reactivate
your steam selection.
www.sharkclean.com
fig. 11
Lift-Away
® ™
Mop in MOP mode be
7
12-04-10 11:33 AM