ITEM
Brake and clutch lever pivots
Center stand pivot
Chassis fasteners
Fuel Tank
Lights, signals and switches
Battery
NOTE :
Pre-operator checks should be made each time the Motorcycle is used. Such an inspection can be accomplished
in a very short time; and the added safety it assures is more than worth the time involved.
WARNING
If any item in the Pre-Operation Check is not working properly, have it inspected and repaired before operating
the Motorcycle.
IF WAITING AT TRAFFIC SIGNAL IS FOR LONG, SWITCH OFF THE ENGINE TO PROTECT
PG1_55.pmd
29
•
Check for smooth operation.
•
Lubricate if necessary.
•
Check for smooth operation.
•
Lubricate if necessary.
•
Make sure that all nuts, bolts, and screws are properly tightened
•
Tighten if necessary.
•
Check fuel level.
•
Fill with fuel if necessary.
•
Check for proper operation.
•
Check fluid level.
•
Fill with distilled water if necessary.
THE ENVIRONMENT AND TO LOWER FUEL CONSUMPTION
4.2
PRE-OPERATION CHECKS
CHECKS
9/24/2005, 7:53 AM
PAGE
6-30
6-30
-
3-5, 3.6
3-2, 6-37
6-33 – 6-35