Yamaha Crux Owner's Manual page 139

b. Spark Plug
c. Valve Clearance
d. Kick Operation
e. Carburetor
f. Drive Chain
g. Fasteners
SERVICE2.pmd 3
: Recommended No. (P-RA7HC - Champion)
Gap
: (Cold condition)
(If required) Inlet
Exhaust
(After matching of the mark on sprocket cam chain with mark on Cylinder
Head Casting and ensuring the Piston at TDC of compression stroke.)
: For free Movement
: • Idle RPM
• Check for Overflow
: • Alignment
• Slackness
1. Cylinder Head Bolts
2. Engine Mounting
a) Engine Mounting Front and Stay Front
b) Stay Engine Front and Frame
c) Engine Mounting Rear and Frame
d) Engine Mounting Upper &
Stay Engine Upper
e) Stay Engine Upper and Frame
f) Engine Mounting Front Lower and Frame
3. Front and Rear Silencer Mounting Nut
4. Crown Handle Centre Bolt
PRE-DELIVERY INSPECTION REPORT
0.9 ±0.2 mm
0.08 ~ 0.12 mm
0.10 ~ 0.14 mm
(1300~1500 RPM)
In warmed up condition
(20 ~ 30 mm)
Specified Torque
(Ft-Lb)
14-17
25-29
25-29
25-29
25-29
25-29
25-29
9-12
20-31
10-33
9/24/2005, 8:01 AM