AOpen AOR-411 User Manual page 43

Add PC
Parameters
Client PC Description
Client PC IP Addresses
Client PC Service
Protocol
Port Range
Apply Changes
Reset
Description
The description for this client PC rule.
Enter the IP address range that you wish to apply this
Access Control rule. This is the user's IP address(es)
that you wish to set up an Access Control rule. You can
select a range of users simply by inputting the starting
users' IP address and the last user's IP address in the
appropriate boxes. If you want to select only one user
then input the user's IP address in both boxes.
Note: You need to give your LAN PC clients a
fixed/static IP address for the Access Control rule to
work properly.
You can block the clients from accessing some Internet
services by checking the services you want to block.
This allows you to select UDP, TCP or both protocol
types you want to block.
You can assign up to five port ranges. The router will
block clients from accessing Internet services that use
these ports.
Click "Apply Changes" to save the setting.
Click "Reset" to clear all fields.
43