Cable Modem - AOpen AOR-411 User Manual

1.2 Fixed-IP xDSL
1.3 PPPoE
1.4 PPTP
Click on one of the WAN type and then proceed to the manual's relevant sub-section (1.1, 1.2,
1.3 or 1.4). Click on Back to return to the previous screen.

1.1 Cable Modem

Choose Cable Modem if your ISP automatically gives you an IP address. Some ISPs may also
require that you fill in additional information such as Host Name and MAC address (see screen
below).
Note: The Host Name and MAC address section is optional and you can skip this section if your
ISP does not require these settings for you to connect to the Internet.
Parameters
Host Name
MAC Address
Your ISP has given you an IP address already.
Your ISP requires you to use a Point-to-Point Protocol over
Ethernet (PPPoE) connection.
Your ISP requires you to use a Point-to-Point Tunneling Protocol
(PPTP) connection.
Description
If your ISP requires a Host Name, type in the host name
provided by your ISP, otherwise leave it blank if your ISP does
not require a Host Name.
Your ISP may require a particular MAC address in order for you
to connect to the Internet. This MAC address is the PC's MAC
address that your ISP had originally connected your Internet
connection to. Type in this MAC address in this section or use
the "Clone MAC Address" button to replace the WAN MAC
address with the MAC address of that PC (you have to be using
that PC for the Clone MAC Address button to work). To find out
the PC's MAC address see Appendix A. (See Glossary for an
explanation on MAC address.)
16