Table of Contents
Advertisement
Parameters
Current Password
New Password
Confirmed Password
Click <Apply> at the bottom of the screen to save the above configurations. You can now
configure other advanced sections or start using the router (with the advance settings in place).
2.1.3 Remote Management
The remote management function allows you to designate a host in the Internet the ability to
configure the Broadband router from a remote site. Enter the designated host IP Address in the
Host IP Address field.
Description
Enter your current password for the remote management
administrator to log into your Broadband router.
Note: By default there is NO password.
Enter your new password.
Enter your new password again for verification purposes.
Note: If you forget your password, you'll have to reset the router
to the factory default (No password) with the reset button (see
router's back panel).
24
Advertisement
Table of Contents
