Table of Contents
Advertisement
Parameters
Host Address
Port
Enabled
Click <Apply> at the bottom of the screen to save the above configurations. You can now
configure other advanced sections or start using the router (with the advance settings in place).
Description
This is the IP address of the
management/configuration access to the Broadband router from a
remote site. This means if you are at home and your home IP address
has been designated the Remote Management host IP address for this
router (located in your company office), then you are able to configure
this router from your home. If the Host Address is left 0.0.0.0 it means
anyone can access the router's web-based configuration from a remote
location, provided they know the password.
Click the Enabled box to enable the Remote Management function.
Note: If you want to access the web-based management from a remote
site, you must enter the router's WAN IP address (e.g. 10.0.0.1) into your
web-browser followed by port number 8080, e.g. 10.0.0.1:8080 (see
below). You'll also need to know the password set in the Password
Setting screen in order to access the router's web-based management.
The port number of remote management web interface.
Select "Enabled" to enable the remote management function.
host in the Internet that will have
25
Advertisement
Table of Contents
