Alg Settings - AOpen AOR-411 User Manual

Remove Special Application
Click <Apply> at the bottom of the screen to save the above configurations. You can now
configure other advanced sections or start using the router (with the advanced settings in place)
Example: Special Applications
If you need to run applications that require multiple connections, then specify the port (outbound)
normally associated with that application in the "Trigger Port" field. Then select the protocol type
(TCP or UDP) and enter the public ports associated with the trigger port to open them up for
inbound traffic.
Example:
ID Trigger Port Trigger Type
1 28800 UDP
2 6112 UDP
In the example above, when a user triggers port 28800 (outbound) for MSN Game Zone then the
router will allow incoming packets for ports 2300-2400 and 47624 to be directed to that user.
Note: Only one LAN client can use a particular special application at a time.

2.4.4 ALG Settings

You can select applications that need "Application Layer Gateway" to support.
added into the "Current Trigger-Port Table" below. If you find any
typo before adding it and want to retype again, just click "Clear"
and the fields will be cleared.
If you want to add a popular application, select one "Popular
Application" and then click "Add".
If you want to remove some Special Application settings from the
"Current Trigger-Port Table", select the Special Application
settings you want to remove in the table and click "Delete
Selected". If you want remove all Special Application settings
from the table, just click "Delete All" button. Click "Reset" will
clear your current selections.
Public Port
2300-2400, 47624
6112
39
Public Type Comment
TCP MSN Game Zone
UDP Battle.net