Sending A Fax Manually; Sending A Fax Manually After Using The Telephone - Epson Aculaser CX16NF User Manual

Note:
The document image quality can be adjusted. For details, refer to "Adjusting the Image Quality" on
page 21.
3. Press the u or d key to select the current transmission method, and then press the Select key.
The TX MODE screen appears.
Note:
If memory transmission has been specified as the default, MEMORY TX appears. If direct transmission
has been specified as the default, DIRECT TX appears.
4. Press the u or d key to select the desired transmission method, and then press the Select key.
5. Specify the fax number of the recipient.
Note:
❏ Refer to "Specifying a Recipient" on page 22.
❏ To send a broadcast transmission to multiple destinations, refer to "Sending a Fax to Multiple
Recipients (Broadcast Transmission)" on page 27.
6. Press the Start key to begin scanning and sending the fax.
Note:
❏ To stop the transmission, press the Stop/Reset key. A message appears, requesting confirmation
to cancel the setting. Select YES, and then press the Select key.
❏ The transmission method returns to the default setting after the document is scanned with a
normal transmission or after transmission with a manual transmission. It is useful if the most
frequently used transmission method is selected as the default. For details, refer to the Printer/
Copier/Scanner User's Guide.

Sending a Fax Manually

Sending a Fax Manually After Using the Telephone

If the machine is connected to a telephone and the same line is used for both phoning and faxing, the
document can simply be sent after talking with the recipient over the phone.
This is useful, for example, if you want to tell the recipient that you are sending a fax.
AcuLaser CX16NF Facsimile User's Guide
Sending Faxes 33