Using The Search Function Of The Phone Book - Epson Aculaser CX16NF User Manual

Using the Search Function of the Phone Book

If a recipient is registered with a speed dial number or a group dial number, the recipient can be found
by using the List or Search function of the phone book.
Follow the procedure described below to search using the Search function of the phone book.
1. Press the Addressbook key 4 times.
Note:
The Addressbook key can be used if the main screen or Can Use AddressBook is displayed.
2. Press the u or d key to select SEARCH, and then press the Select key.
A screen appears, allowing you to enter the text to be searched for.
3. Using the keypad, enter the first few characters of the name programmed for the desired recipient.
Note:
❏ Enter the name programmed in the speed dial number or the group dial number. For details on
entering text, refer to "Entering Text" on page 74.
❏ Text up to 10 characters long can be entered.
4. Press the Select key.
The number of names beginning with the text entered in step 3 is displayed.
Note:
If no names beginning with the entered text are found, NOT FOUND is displayed.
5. Press the u or d key to select the desired destination, and then press the Select key.
Note:
If the desired recipient name does not appear in the search results, press the Back key twice to return
to the screen allowing you to enter the text to be searched for, and then try searching for different
text.
6. When EDIT=Select appears, press the Select key again.
7. Press the u or d key to select FINISH, and then press the Select key.
Note:
To erase the selected destinations, press the Stop/Reset key.
AcuLaser CX16NF Facsimile User's Guide
Sending Faxes 26