Sending A Batch Transmission - Epson Aculaser CX16NF User Manual

6. Press the Start key to begin scanning, and then the machine enters transmission standby mode.
appears in the screen when the machine is in standby mode.
Note:
If you want to cancel a timer transmission, select CANCEL RESERV.. For details, refer to "Canceling
a Queued Transmission" on page 36.

Sending a Batch Transmission

Multiple documents can be scanned and stored in the memory of this machine to be sent together to a
single destination at a specified time.
Note:
From the UTILITY menu, batch transmission settings (transmission time) must have been registered
with a speed dial number in advance. For details, refer to "Using the Speed Dial Function" on page
24.
1. Position the document to be faxed.
2. If desired, adjust the image quality.
Note:
For details, refer to "Adjusting the Image Quality" on page 21.
3. Select destinations for the batch transmission from the favorite list, or specify their speed dial
number.
Note:
❏ For details on selecting destinations from the favorite list, refer to "Using the Favorite List" on
page 23.
❏ For details on specifying destinations by their speed dial number, refer to "Using the Speed Dial
Function" on page 24.
4. Press the Start key to begin scanning, and then the machine enters transmission standby mode.
appears in the screen when the machine is in standby mode.
AcuLaser CX16NF Facsimile User's Guide
Sending Faxes 31