Sending A Fax At A Specified Time (Timer Transmission) - Epson Aculaser CX16NF User Manual

Sending a Fax at a Specified Time (Timer Transmission)

A document can be scanned and stored in memory to be sent at a specified time. This feature is
convenient for sending faxes at discounted calling times.
Note:
❏ When sending multiple documents together to a single destination at a specified time, batch
transmission is useful since only a single connection is required.
❏ If the machine is not programmed with the current time, the fax cannot be sent at the specified time.
For details on specifying the time, refer to the Printer/Copier/Scanner User's Guide.
❏ Timer transmission can be combined with broadcast transmission.
1. Position the document to be faxed.
2. If desired, adjust the image quality.
Note:
The document image quality can be adjusted. For details, refer to "Adjusting the Image Quality" on
page 21.
3. Press the u or d key to select TIMER TX, and then press the Select key.
The TIMER TX SETTING screen appears.
4. Using the keypad, enter the desired transmission time, and then press the Select key.
Note:
❏ The time is set in the 24-hour format.
❏ If you want to correct the time, press the Back key, and then enter the correct time.
5. Specify the fax number of the recipient.
Note:
❏ Refer to "Specifying a Recipient" on page 22.
❏ To send a broadcast transmission to multiple destinations, refer to "Sending a Fax at a Specified
Time (Timer Transmission)" on page 30. After all recipients have been specified, press the Start
key to begin scanning. After scanning is finished, the machine with enter a standby state.
❏ If the specified speed dial number is registered with batch transmission settings, the fax will be
sent at the time specified for the batch transmission.
AcuLaser CX16NF Facsimile User's Guide
Sending Faxes 30