Memory Transmission And Direct Transmission; Memory Transmission; Direct Transmission; Changing The Transmission Method - Epson Aculaser CX16NF User Manual

Note:
To cancel a batch transmission, select CANCEL RESERV.. For details, refer to "Canceling a Queued
Transmission" on page 36.

Memory Transmission and Direct Transmission

There are two methods for sending documents with this machine: memory transmission and direct
transmission.

Memory Transmission

With this method, the fax transmission starts after the entire document is scanned and stored in the
memory. The total number of pages is automatically printed with the page number in the header.
However, the memory may become full if there are many pages in the document or if the data is large
due to the fine image quality (resolution).

Direct Transmission

With this method, the transmission is performed in real time in the transmission sequence of the
destinations. If there are many pages in the document, the fax can be sent with this method without the
memory becoming full.
Note:
❏ As a default, MEMORY TX (memory transmission) is selected. The default setting can be changed from
the UTILITY menu. For details, refer to the Printer/Copier/Scanner User's Guide.
❏ Direct transmission cannot be used together with duplex (double-sided) document transmission.

Changing the Transmission Method

The transmission method can be temporarily changed from the default setting.
1. Position the document to be faxed.
2. If desired, adjust the image quality.
AcuLaser CX16NF Facsimile User's Guide
Sending Faxes 32