Epson Aculaser CX16NF User Manual page 20

Note:
Closing it too quickly may cause the document to move on the original glass.
6. Adjust the document image quality.
Note:
For details on adjusting the document image quality, refer to "Adjusting the Image Quality" on page
21.
7. Specify the fax number of the recipient in one of the following ways:
❏ Direct dialing
❏ Using the favorite list
❏ Using the Speed Dial function
❏ Using the Group Dial function
❏ Using the Phone Book functions
❏ Using the Redial/Pause key
Note:
❏ For details on specifying the recipient, refer to "Specifying a Recipient" on page 22. For details
on using the Redial/Pause key, refer to "Using the Redial Function" on page 27.
❏ A transmission can also be sent to multiple recipients with the Broadcast function. For details on
sending a broadcast transmission, refer to "Sending a Fax to Multiple Recipients (Broadcast
Transmission)" on page 27.
8. Press the Start key.
A screen appears, requesting confirmation of the scanning area.
9. To scan the displayed scanning area, press the Select key. The document is scanned.
Note:
To change the displayed scanning area, press the u or d key, select the desired scanning area. Press
the Select key again to start scanning.
10. To scan multiple pages from the original glass, check that the message NEXT PAGE? appears,
replace the document, and then press the Select key. When scanning of the document is finished,
press the Start key.
The document is scanned, and then the fax is sent.
AcuLaser CX16NF Facsimile User's Guide
Sending Faxes 20