Table of Contents
Advertisement
If the appliance is not working correctly, please carry out the following checks
before contacting your local AEG Service Force Centre.
IMPORTANT: If you call out an engineer to a fault caused by incorrect use or
installation, a charge will be made even if the aookuabce is under guarantee.
Problems
The hob doesn't work.............
The hob gets hot.................
The fuses are constantly blow-
ing.....
The zones make clicking and
other noises
What to do if...
Remedy
Check that the hob is switched on.
Check the HPFI/HFI relay in the
main fuse box. Check the fuses for
the hob.
The hob may get as hot as 60°C.
Possibly, you have too many electri-
cal appliance in use at one go. If
your hob is connected to a 10 Amp
fuse group, there is a high risk of
overload.
During use there will be noise from
the induction coil and the fan. This is
completely normal and has no effect
on cooking performance.
However, some pans can increase the
noise. If the noise becomes a nui-
sance, one option could be to use a
different pan.
At the low heat settings, clicks will
be heard. These occur when the heat
is being switched on and off. This is
completely normal and has no effect
on cooking performance.
37
Advertisement
Table of Contents
