Table of Contents
Advertisement
Problems
The zones won't turn on. The dis-
play shows:
The zones won't turn on and the
display shows:
The display is flashing "F".
If the rear zone is set to levels 8 or
9 while the front zone is set to
Power, the front zone will revert to
level 9.
In-guarantee customers should ensure that the above checks have been made as
the engineer will make a charge if the fault is not a mechanical or electrical
breakdown.
Please note that it will be necessary to provide proof of purchase for any in-guar-
antee service calls.
Remedy
Child safety has been activated.
You can either press the
at the same time as you press a set-
ting, or you can deactivate child-
proofing, see Section "How to use
... Child safety".
Autostop has been activated. Press
k
the
button. The hob is now
ready for use.
Check whether the zones are suffi-
ciently covered by the pan. See the
section "How to use...Suitable
pots"
Check that the pans are suitable for
induction. See the section: "How to
use...Suitable pans" If "F" still
flashes, contact service. See section
"Service and spare parts".
The front and rear zones are con-
nected. If you wish to use setting 8
or 9 on the rear zone, the front zone
cannot be set higher than level 9.
Power will automatically be turned
off.
38
j
button
Advertisement
Table of Contents
