Table of Contents
Advertisement
Meatprobe
For switching off the oven when the temperature at the centre of a roast reaches a set
temperature.
There are two temperatures to consider::
– The oven temperature: see Roasting Table
– The core temperature: see Meatprobe Table
Important: Only the meat probe supplied may be used. If replacing, please use only
genuine spare parts.
Do not use the meat probe on level 1.
1. Switch on the appliance using the On/Off
2. Push the tip of the meat probe right into the
meat so that the tip is in the centre of the
meat.
3. Insert the meat probe plug into the socket on
the side wall of the oven as far as it will go.
4. Using the
temperature.
The display changes to the current core tem-
perature.
If the current core temperature is already dis-
played before the core temperature is set, then
press the Selection
the function Meatprobe
carry out the setting.
The core temperature is displayed from 30°C.
or
button, set the desired core
button repeatedly until
flashes and then
Using the Oven
button.
15
Advertisement
Table of Contents
