Inserting/Removing The Fat Filter; Meatprobe - AEG Electrolux E9871-7 User Manual

Inserting/Removing the Fat Filter

Only use the fat filter when roasting to protect
the rear heating elements from fat splashes.
Inserting the fat filter
Hold the fat filter by the tab and insert the two mounts downwards into the opening on
the rear wall of the oven (fan opening).
Removing the fat filter
Hold the fat filter by the tab, unhook it and lift out.

Meatprobe

Meat probe measures the core temperature of the meat. When the meat reaches set tem-
perature the oven switches off automatically.
There are two temperatures to be set:
• The oven temperature: See Roasting Table in the booklet „Tables, Tips and Recipes"
• The core temperature: See Meat probe Table in the booklet „Tables, Tips and Recipes"
Only use the meat probe supplied or genuine replacement parts.
1. Switch on the appliance.
2. Put the point of the meat probe into the
centre of the meat.
3. Put the meat probe into the socket on the
side wall of the oven.
4. The display shows MEATPROBE and
5. Use or
the core temperature.
After 5 seconds the display changes to
the current core temperature.
If the display shows OVEN FUNCTIONS before
you set the core temperature, use
6. Set the oven function and, if necessary, the oven temperature.
The appliance calculates the provisional end time for the set core temperature again
and again. The display constantly shows the new provisional end time.
in less than 5 seconds to set
until flashes. Set the core temperature.
11
Daily use