Table of Contents
Advertisement
18
Using the Oven
Cleaning Reminder
The Cleaning Reminder detects when pyrolytic cleaning is required and alerts the user to
this fact.
How to use the clock functions
• After a clock function has been selected, the corresponding function light flashes for
about 5 seconds. During this period, the desired times can be set or modified using
the
or
• When the desired time has been set, the corresponding function light continues to
flash for approx. 5 seconds, then remains illuminated. The set time begins to run.
• With Countdown the oven must also be switched on in order to set the clock function.
• By pressing
Checking the time set or remaining
Press the Selection
and the time set or remaining is displayed.
Using residual heat with the Duration
When the Duration
heating elements off, when 90% of the time set or calculated has elapsed. The residual
heat present is used to continue the cooking process until the time set has elapsed
(3 to 20 mins.).
Minute Minder
1. Press the Selection
Minute Minder
2. Using the
countdown.
button.
and
at the same time, the time set can be reset.
button repeatedly, until the appropriate clock function flashes
and End
button repeatedly until
flashes.
or
button, set the desired
and End
clock functions are used, the oven switches the
clock functions
Advertisement
Table of Contents
