Table of Contents
Advertisement
Client PC Service
Protocol
Port Range
Apply Changes
Reset
Click <Apply Changes> at the bottom of the screen to save the above configurations. You can
now configure other advanced sections or start using the router (with the advanced settings in
place).
You can block the clients from accessing some Internet
services by checking the services you want to block.
This allows you to select UDP, TCP or both protocol
types you want to block.
It can be assign up to five port ranges. The router will
block clients from accessing Internet services that use
these ports.
Click "Apply Changes" to save the setting.
Click "Reset" to clear all fields.
71
Advertisement
Table of Contents
