Table of Contents
Advertisement
Parameters
Enable wireless access control
Add MAC address into the list
Remove MAC address from the list
Click <Apply> at the bottom of the screen to save the above configurations. You can now
configure other advanced sections or start using the router (with the advanced settings in place).
Description
Enable wireless access control
Fill in the "MAC Address" and "Comment" of the
wireless station to be added and then click "Add".
Then this wireless station will be added to the
"Current Access Control List" below. If you find
any issue before adding it and want to retype
again, just click "Clear" and both "MAC Address"
and "Comment" fields will be cleared.
If you want to remove some MAC address from
the "Current Access Control List ", select the
MAC addresses you want to remove in the list
and then click "Delete Selected". If you want
remove all MAC addresses from the table, just
click "Delete All" button. Click "Reset" will clear
your current selections.
57
Advertisement
Table of Contents
