Table of Contents
Advertisement
Click <Apply> at the bottom of the screen to save the above configurations. You can now
configure other advanced sections or start using the router (with the advanced settings in place).
2.4.2 Advanced Settings
You can set advanced wireless LAN parameters of this router. The parameters include
Authentication Type, Fragment Threshold, RTS Threshold, Beacon Interval, Preamble Type...
You should not change these parameters unless you know what effect the changes will have on
this router.
Parameters
Authentication Type
Default
addresses of other access points that join the
bridging work.
Description
There are two authentication types: "Open
System" and "Shared Key". When you select
"Open System", wireless stations can associate
with this wireless router without WEP encryption.
When you select "Shared Key", you should also
setup WEP key in the "Encryption" page and
wireless stations should use WEP encryption in
the authentication phase to associate with this
wireless router. If you select "Both", the wireless
46
Advertisement
Table of Contents
