Port
Enabled
Click <Apply> at the bottom of the screen to save the above configurations. You can now
configure other advanced sections or start using the router (with the advanced settings in place).
2.2 WAN
Use the WAN Settings screen if you have already configured the Quick Setup Wizard section and
you would like to change your Internet connection type. The WAN Settings screen allows to
specify the type of WAN port connect you want to establish with your ISP. The WAN settings offer
the following selections for the router's WAN port, Dynamic IP, Static IP Address, PPPoE,
PPTP, L2TP, Telstra Big Pond, DNS and DDNS.
The port number of remote management web interface.
Select "Enabled" to enable the remote management function.
33