Dynamic Ip; Static Ip Address; Pppoe (Ppp Over Ethernet); Pptp - AOpen AOI-892 User Manual

Parameters
2.2.1 Dynamic IP address

2.2.2 Static IP address

2.2.3 PPPoE

2.2.4 PPTP

2.2.5 L2TP
2.2.6 Telstra Big Pond
2.2.7 DNS
2.2.8 DDNS
Once you have made a selection, click <More Configuration> at the bottom of the screen and
proceed to the manual's relevant sub-section.

2.2.1 Dynamic IP

Choose the Dynamic IP selection if your ISP will automatically give you an IP address. Some
ISP's may also require that you fill in additional information such as Host Name, Domain Name
and MAC address (see chapter 1 "Cable Modem" for more detail).
2.2.2 Static IP Address
Select Static IP address if your ISP has given you a specific IP address for you to use. Your ISP
should provide all the information required in this section. (See chapter 1 "Fixed IP" for more
detail)

2.2.3 PPPoE (PPP over Ethernet)

Select PPPoE if your ISP requires the PPPoE protocol to connect you to the Internet. Your ISP
should provide all the information required in this section. (See chapter 1 "PPPoE" for more
detail)
2.2.4 PPTP
Select PPTP if your ISP requires the PPTP protocol to connect you to the Internet. Your ISP
should provide all the information required in this section. (See chapter 1 "PPTP" for more detail).
Description
Your ISP will automatically give you an IP address
Your ISP has given you an IP address already.
Your ISP requires PPPoE connection.
Your ISP requires you to use a Point-to-Point Tunneling
Protocol (PPTP) connection
Your ISP requires L2TP connection.
Your ISP requires Telstra Big Pond connection.
You can specify a DNS server that you wish to use
You can specify a DDNS server that you wish to use and
configure the user name and password provided by you
DDNS service provider.
34
.