56
Installation Instructions
Installation Instructions
Attention: The new appliance may only be installed and connected by a regis
tered expert.
Please comply with this. If you do not, any damage resulting is not covered by
the warranty.
Safety information for the installer
• The electrical installation is to be set up so that the appliance can be isolated
from the mains with a minimum 3mm all pole contact separation.
Suitable separation devices include e.g. cut outs, fuses (screw fuses are to be
taken out of the holder), RCD's and contactors.
• Anti shock protection must be provided by the installation.
• The built in unit must meet the stability requirements of DIN 68930.
• Built in ovens and built in cooking surfaces are fitted with special connection
systems. For safety reasons, they must only be combined with appliances from
the same manufacturer.