Using Stereo Headphones - Radio Shack DX 275 User Manual

Shortwave
Table of Contents

Advertisement

SETTING THE AM/FM TUNING INCREMENT
The AM/FM frequency increment switch sets the correct frequency increments
for different countries.
compartment.
Set the switch using the following guidelines:
If you are in the United States, Canada, or another north or south
American country, the switch is already set to B for you.
setting, the AM frequency increments are 10 KHZ and the FM frequency
increments are 200 kHz.
If you are in a country where the AM frequency increments are 9 kHz,
set the switch to A.
100 kHz.
NOTE:
All stored frequencies erase when you change the switch position.

USING STEREO HEADPHONES

For private listening, connect optional stereo headphones into the
receiver's 1/8-inch jack.
speaker.
Your local Radio Shack store offers a wide selection of stereo
headphones with the required 1/8-inch plug.
Listening Safely
Do not listen at extremely high volume levels, especially using an
earphone.
Extended, high-volume listening can lead to permanent hearing
loss.
To protect your hearing, follow these guidelines when you use headphones.
Always start by setting the volume to the lowest level possible before
you begin listening.
gradually increase the volume as necessary.
Once you set the volume, do not increase it.
your ears adapt to the volume level, so a volume level that does not
cause discomfort might still damage your hearing.
USING THE FOLDING STAND
Your receiver has a folding stand on the back.
receiver more securely and for easier viewing of the display.
(ALL-02/27/95)
The switch is located in the battery
In this setting, the FM frequency increments are
This disconnects the receiver's internal
Put the earphone or headphones on, then
Over a period of time,
Use it to position the
In this

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents