Installation; Power Sources - Radio Shack DX 275 User Manual

DX-375 (200-0212)

POWER SOURCES

You can power your receiver from:
Internal battery power (two alkaline C batteries).
Standard household AC power (with an optional AC adapter).
Vehicle battery power (with an optional DC adapter).
Internal Battery Power
You can power the receiver with two C batteries.
recommend alkaline batteries, such as Radio Shack Cat. No. 23-551.
CAUTION: If you disconnect power from the receiver for about 1 hour, all
information stored in memory will be lost.
frequencies stored in memory, keep the batteries installed.
NOTES: Replace the batteries when BATTERY appears on the display.
Before you replace the batteries, be sure to turn off the
receiver's power.
Follow these steps to install the batteries.
1. Push the cover in the direction of the arrow and remove it from the
battery compartment.
2. Remove the old batteries and discard them immediately.
WARNINGS: If you do not plan to use the receiver for a month or more,
remove and store the batteries.
Never leave dead, old, or weak batteries in the receiver.
can leak chemicals and corrode or damage electronic circuits.
Always dispose of them promptly and properly.
Never incinerate batteries.
3. Place two C batteries in the compartment as indicated by the polarity
symbols (+ or -) marked beside the compartment.
place the batteries on top of the lift-out ribbon.
CAUTIONS: Use only fresh batteries of the required size and type.
Never mix fresh and old batteries.
4. Replace the compartment cover.

Installation

For best performance, we
To keep the
For easy removal,
they