Connecting Headphones - Radio Shack 1201178 User Manual

Listen to an External Audio Source
1.
Turn on the radio and adjust volume.
Use a Ç-inch (3.5 mm) audio cable (not supplied) to
2.
connect the earphone jack on your auxiliary audio
source to AUX IN on the back of the radio. The radio
automatically switches to auxiliary mode and the
display shows AU.
3.
Use the controls on your connected device to
control playback.
4.
When you disconnect the audio cable, the radio
automatically exits auxiliary mode.

Connecting Headphones

For private listening, plug your
headphones or earphones into the
Ç-inch headphone jack * on the back
of the radio.
Listening Safely
Do not wear headphones, earphones, or
earbuds while operating a motor vehicle or riding a bicycle. This
can create a traffi c hazard and could be illegal in some areas.
To protect your hearing, follow these guidelines:
• Do not listen at high volume levels. Extended high-volume
listening can lead to permanent hearing loss.
• Set the volume to the lowest setting. Then turn on your
audio device and adjust the volume to a comfortable level.
• Avoid increasing the volume. Your ears will adapt to the
volume level, so a level that does not cause discomfort
could still damage your hearing.
7
*
AUX IN