AEG COMPETENCE B 8100 User Instructions page 51

Fitting the Middle Door Glass
0 1. Replace the two separators on the left and right sides of the middle
pane of glass.
2. Guide the middle pane of glass at an angle from above into the section
on the handle side (1) of the door.
3. Lower the middle pane of glass (2) and slide it in the direction of the
lower edge of the door until it reaches the stop under the lower
bracket.
Fitting the Top Door Glass
0 1. Guide the top pane of glass at an
angle from above into the section
on the handle side (1) of the door.
2. Lower the pane of glass (2). Place
the pane, against the force of the
spring on the handle side, in front
of the retaining profile on the
lower edge of the door and
slide under the retaining profile.
The pane of glass must be firmly seated!
3. Re-hang the oven door.
Operating Instructions
51