Table of Contents
Advertisement
Getting Started - cont.
4
Turn the water tank cap counter clockwise and
remove from the tank. (Fig. 4)
Use the filling flask to pour water into the tank.
Do not fill past the fill line on the water tank.
(Fig. 5)
5
After filling the tank, replace the water tank
cap by placing back on the tank and turning it
clockwise until tight.
IMPORTANT: Do not use on unsealed wood or
unglazed ceramic floors. On surfaces that have
been treated with wax or some no wax floors,
the sheen may be removed by the heat and
steam action. It is always recommended to test
an isolated area of the surface to be cleaned
before proceeding. We recommend that you
check the use and care instructions from the
floor manufacturer.
4
fig. 4
fig. 5
Calcium and mineral deposits can build up and
impact the performance of your steam mop
over time. To extend the life of your product we
recommend that you use distilled water.
fig. 6
ATTACHING THE MICROFIBRE POCKET
1
Fit one side of the microfibre cleaning pocket
onto the head first, then using the lavender
loop, pull the pocket over the head. Attach the
hook and loop quick fasteners on the top of the
pocket to secure in place. (Fig. 6)
Advertisement
Table of Contents
