Shark Z1900 Series Owner's Manual page 7

fig. 1
IMPORTANT: Always make sure the mop is
unplugged from the wall when not in use.
Never fill the mop, attach the mop head, or
change or remove the microfibre cleaning pocket
when the mop is plugged into the wall. To
prolong the life of your Shark
Mop, we recommend using distilled water.
Make sure you only add water to the tank. The
addition of chemicals or cleaning solutions may
damage the appliance and could be unsafe for
you and your family.
Steam Pocket
® ™
ASSEMBLY
1 Insert the mop handle into the main body of the
steam mop (into the tube that leads to the tank).
Push the mop handle and main body of the
steam mop together until you hear it "click" into
place. (Fig. 1)
2 Snap the desired mop head into the mop body
by lining up the groove on the back of the mop
body with the groove on the back of the mop
head. Push until you hear it "click" into place.
(Fig. 2)
3 Hold the power cord and wrap it around the cord
holders. (Fig. 3)
fig. 2
fig. 3
3