Honda CRF250R 2005 Owner's Manual page 48

Air Cleaner
9. Apply a thin coat of Honda White Lithium
Grease to the sealing surface.
10. Assemble the air cleaner (3) and holder (5).
Install the tab (6) of the holder in the hole (7)
of the air cleaner tab (8), and the air cleaner
retaining bolt (1) through the assembly.
(6)
(8)
(7)
(1) air cleaner retaining bolt
(3) air cleaner (7) hole
(5) air cleaner holder (8) air cleaner tab
(6) holder tab
44
Servicing Your Honda
11.Install the assembly into the air cleaner
housing keeping the two access top tabs (2)
up.
12.Carefully position the sealing flange of the
element to prevent dirt intrusion.
13.Align the set tab (9) of the air cleaner with the
"∆" mark (4) of the air cleaner housing by
rotating the air cleaner clockwise. Tighten the
retaining bolt (1) securely.
(1)
(3)
(5)
(1) air cleaner retaining bolt
(2) two access top tabs
(3) air cleaner
(4) "∆" mark
(9) set tab
(2)
(4)
(9)
(3)
(1)
NOTICE
Improper installation of the air cleaner assembly
may allow dirt and dust to enter the engine and
cause rapid wear of the piston rings and cylinder.
12.Reinstall the seat (page 29), making sure it is
securely attached.