Honda CRF250R 2005 Owner's Manual page 83

Brake Pad Wear
Brake pad wear depends on the severity of usage
and track conditions. (Generally, the pads will
wear faster on wet and dirty tracks) Inspect the
pads at each regular maintenance interval (page
21).
Front Brake Pads
Inspect the brake pads (2) through the front
wheel to determine the pad wear. If either pad is
worn anywhere to a thickness of 0.04 in (1 mm),
both pads must be replaced.
minimum thickness
indicator
(1) (3)
wear indicator
grooves
(1) brake caliper (3) brake disc
(2) brake pads
Rear Brake Pads
Inspect the brake pads (5) from the rear side of
the caliper to determine the pad wear. If either
pad is worn anywhere to a thickness of 0.04 in
(1 mm), both pads must be replaced.
(6)
0.04 in
(1 mm)
(4) rear brake caliper
(5) brake pads
Other Inspections
(2)
replace
Check that the front lever and rear pedal
assemblies are positioned properly and the
securing bolts are tight.
0.04 in
(1 mm)
Make sure there are no fluid leaks. Check for
deterioration or cracks in the hoses and fittings.
(2)
replace
(4)
minimum thickness
(5)
indicator
0.04 in
(1 mm)
(5)
replace
(6) brake disc
Brakes
79
Servicing Your Honda