Honda CRF250R 2005 Owner's Manual page 37

2. Tighten the screw (4) on the air cleaner
connecting tube clamp (5).
3. Hook the air cleaner cover rubber (6).
4. Install and hook the fuel tank band (7).
5. Connect the crankcase breather tube (8).
(5)
(4)
(4) screw
(5) air cleaner connecting tube clamp
(6) air cleaner cover rubber
(7) fuel tank band
(8) crankcase breather tube
6. Remove the old gasket from exhaust pipe.
7. Install the muffler clamp (9) by aligning the
tab (10) of the muffler clamp with the cut-out
(11) of the muffler (12).
(11)
(10)
(12)
(9) muffler clamp (11) cut-out
(10) tab (12) muffler
8. Install the new gasket (13) as shown.
(7) (6)
(13) gasket
9. Install the muffler (12).
(8)
10. Tighten the muffler B bolt/washer (14) and
muffler A bolt (15) to the specified torque:
19 lbf·ft (26 N·m, 2.7 kgf·m)
11. Tighten the muffler clamp bolt (16) to the
specified torque:
15 lbf·ft (21 N·m, 2.1 kgf·m)
(9)
(12)
(12) muffler
(14) muffler B bolt/washer
(15) muffler A bolt
(16) muffler clamp bolt
12.Install the side covers (17), side cover bolts
13.Install the seat (page 29).
(13)
(17) side cover
(18) side cover bolts/collars
(14)
(15) (16)
Subframe Removal
and collars (18).
(17)
Servicing Your Honda
(18)
33