Save A Redial Entry To The Directory - AT&T TL86109 User Manual

Telephone operation
Redial
To dial a redial entry of the telephone base:
Lift the corded handset, or press 1 LINE, 2 LINE.
1.
Then press REDIAL to enter the redial list.
DIR,
2. Press
browse and then press the DIAL softkey to dial
the number displayed.
You can also select a redial entry before dialing.
1. Press REDIAL in idle mode.
DIR,
2. Press
browse until the desired number displays. The telephone base beeps twice
at the end of the list.
Press 1 LINE or 2 LINE to use the corresponding line, or press
3.
CELLULAR
NOTE: You may also lift the corded handset or press SPEAKER
The default line for the corded handset and speakerphone are determined by the line
preference setting. To change the setting, please see page 43.

Save a redial entry to the directory

Using a cordless handset:
1. Press REDIAL/
2. Press or
3. Press the SAVE softkey.
4. The handset displays ENTER NUMBER. Use the dialing keys to edit the
number, if necessary.
• Press
OFF
• Press to move the cursor to the right or
• Press and hold
5. Press the NEXT softkey.
6. Press or
• Home
• Cell
• Work
• Other
Press the NEXT softkey. The handset displays ENTER NAME. Use the
7.
dialing keys (page 95) to enter a name.
• Press
OFF
• Press to move the cursor to the right or
8. Press the SAVE softkey to confirm and you hear a confirmation tone.
CID, /DELETE or /REC to
CID, /DELETE or /REC to
to use the cell line.
in idle mode.
PAUSE
to browse until the desired number displays.
/CLEAR to erase a digit.
/PAUSE
REDIAL
to select one of the following types:
/CLEAR
to erase a character.
to the left.
to insert a dialing pause (a p appears).
to the left.
81
to dial a redial entry.