Connect/Disconnect An Active Device - AT&T TL86109 User Manual

Bluetooth
Bluetooth setup

Connect/disconnect an active device

While in the active devices menu, you may connect or disconnect your
active device.
1. Press the MENU softkey on the telephone base in
idle mode.
2. Press DIR,
Bluetooth, then press the SELECT softkey.
3. Press DIR,
Active devices, then press the SELECT softkey.
DIR,
4. Press
device when necessary, then press the OPTION softkey.
DIR,
5. Press
Connect/Disconnect (whichever is applicable), then
press the SELECT softkey to confirm.
NOTE: When your active device is connected, you are prompted to
select Disconnect. When your active device is disconnected, you are
prompted to select Connect.
When one or more than one active devices are
disconnected, the telephone base displays the CONNECT softkey. You may
also connect a device to the telephone base with the following steps:
1. Press the CONNECT softkey on the telephone base in idle mode.
2. If only one device is disconnected, the telephone base displays
Connecting Cell phone A to the base...
-OR-
If two devices are disconnected, the telephone base displays the
CONNECT DEVICE list. Press
highlight a selected device, then press the SELECT softkey. The telephone
base displays Connecting Cell phone A to the base...
When the connection is successful, the telephone base displays Device
3.
connected to the base.
NOTE: If the connection fails, the telephone base displays Connection failed and then
Auto-connect function enabled.
then periodically attempt to connect with your Bluetooth device.
CID, /DELETE or /REC to highlight
CID, /DELETE or /REC to highlight
CID, /DELETE or /REC to highlight a
CID, /DELETE or /REC to highlight
Press the SELECT softkey and the telephone base will
DIR, CID, /DELETE or /REC to
23
Answering sys
Directory
Cal l log
Bluetooth
SELECT
BLUETOOTH
Add headset
Active devices
Paired devices
SELECT
ACTIVE DEVICES
A Cel l phone A
B Cel l phone B
INFO OPTION
ACTIVE DEVICES
Connect
Remove active
BACK SELECT