Dual Reception (DW) Functions
The FT1DR supports the following three dual reception functions:
(1) Dial dual reception
(2) Memory dual reception
(3) Home channel dual reception
The signal of the specified memory channel (priority memory channel) is checked at
intervals of about 5 seconds. If this signal is detected, it is received.
Example: Check of the signal of priority memory channel "90" during reception of
"145.500 MHz"
Frequency being received
The signal of the priority memory
channel "90" is checked at intervals of
about 5 seconds.
Dial Dual Reception
VFO mode
Priority memory channel
1
Select the Memory mode.
Press the F key more than 1 second. The Write mode is
2
selected, and the f icon and the channel number on the
LCD blink.
Turn the O knob to select a memory channel, and then
3
press the B key more than 1 second.
Select a memory channel (priority memory channel) whose
signal is to be received preferentially. "P" is displayed on
the LCD.
4
Select the frequency to be received.
Select the frequency to be received constantly.
Press the F key more than 1 second.
5
The Write mode is canceled.
Press the V key more than 1 second.
6
Dial dual reception starts, and "VDW " is displayed on the LCD.
Press the V key briefly.
7
Dial dual reception is canceled.
64
Useful Functions
Useful Functions
If the signal of the priority channel "90"
is received, the decimal point blinks.
FCC
ID:
K6620445X20
IC:
511B-20445X20
"P" is displayed.
"VDW" is displayed.
YAESU
MUSEN
CO.,
LTD.