Specifying The Frequency You Do Not Want To Scan; Deleting A Frequency Saved In The Skip Search Memory - Yaesu FT1DR Operating Manual

Using the Scanning Function

Specifying the Frequency You Do Not Want to Scan

1
Start VOF scanning.
Start VOF scanning with reference to "VFO Scanning" on page 63.
When scanning stops at the frequency you do not want to receive, press the F key
2
more than 1 second.
Numbers of unprogrammed skip search memory channels blink.
Turning the O knob allows you to specify other skip search memory channels.
Hints
Press the F key briefly.
3
The frequency is saved in the skip search memory, and scanning resumes.
Hints • You can specify the frequency you do not want to receive by using the following procedure in
advance:
1 In the VFO mode, tune in to the frequency you do not want to scan.
2 Press the F key more than 1 second.
3 Turn the O knob to select a skip search memory channel.
4 Press the F key briefly.
• To cancel scanning, press the p key.

Deleting a Frequency Saved in the Skip Search Memory

The frequency saved in the skip search memory can be deleted in the following
procedure. After this, the deleted frequency is scanned.
1
Select the Memory mode.
Press the F key more than 1 second.
2
Turn the O knob to select a memory channel of the skip search memory.
3
Select the memory channel (901-999) containing the frequency you want to delete.
When selecting a memory channel, pressing the M key allows you to skip memory
channel numbers in steps of 100 memory channel numbers.
Press the D key.
4
"DELETE OK?" is displayed on the LCD.
Press the X key.
5
The saved frequency is deleted.
Hints To delete another frequency from the skip search memory, repeat steps 2-4.
Hint
• Restoring the Frequency Deleted from the Skip Search Memory
If you have not specified a new frequency for the same memory channel, you can restore the
deleted frequency by repeating steps 1-4.
50
FCC ID: K6620445X20
IC: 511B-20445X20
YAESU MUSEN CO., LTD.